Air source water heaters are gradually being recognized for their significant advantages of durability, safety, energy saving and comfort, becoming the new favourite of consumers and making daily bathing an enjoyable affair. For example, Juteng stainless steel air source water heater, fast heating, large water volume, no need to wait for a bath, plenty of hot water, that is, open that is!

However, some consumers still lack of understanding of the air source water heater, often encountered in the installation of the doubts, the following Juteng air source can take you to understand the relevant installation knowledge.

Q----Where is the air source water heater installed?

Air source water heater must be installed in a ventilated, sunny place, so as to facilitate the host as much as possible to absorb the heat in the air, to ensure that the heating effect, balcony, roof, air conditioning unit location can be.

Q----At what part of the renovation is the air source water heater installed?

It is recommended that before the entry of water and electricity, please ask a professional engineer or installer to visit the site to check the installation conditions, determine the installation location, determine the direction of the hot water pipeline, to ensure that the water heater works well and efficiently.

Q----Can I still install an air source water heater after I've already renovated?

If the house has been renovated, the house has been laid with cold and hot water pipelines, but the pipelines, plumbing and electricity can be adapted to the air source water heater, the same can be installed.

Q----What are the voltage/water pressure requirements for an air source water heater?

Any electrical appliances have certain requirements on the voltage, the power supply of the air source water heater is required to be 220V ~ 1/50Hz, and the use of the air source water heater in a low voltage condition will cause some damage to the unit. Most of the water tanks of air water heaters use pressurized tanks, with normal pressure values ranging from 0.2-0.4mpa, and too low a pressure will result in less water coming out of the hot water outlet or no water coming out.

The above is to answer your questions about air source water heater installation. If you have the need to buy, you want to know more about it, you can also contact us directly for one-on-one service consulting, Juteng focus on stainless steel air source for 23 years, specializing in providing air source domestic water heaters for the majority of consumers, air source central water heating system solutions, so that you can enjoy a comfortable hot water life.